3 IN 1 Feeder Machine for automotive industry

3 IN 1 FEEDER MACHINE FOR AUTOMOTIVE INDUSTRY

3 IN 1 Feeder Machine for automotive industry consist of Decoiler Straightener NC Servo Roll Feed for Coil Feeding Line are therefore able to work thickness from 0.6 mm to 6.0mm with width that range from 70 to 1500mm and weight up to 10tons depending on the needs of the specific customer.Various kinds of materials can be machined, from soft ones such as aluminium and alloys, to hot and cold-rolled materials and carbon and stainless steel, and to high-strength materials and lamination steel.

Decoiler Leveler Feeder , with decoiler, straightener and feeder machine in one combination unit. It used to uncoiling metal strip from coil stock, straightening it to required flatness and feed it to press machine for stamping process.Thanks to a well-knit body and advanced mechanical structure, it can easily handle coil stock up to 10tons.

With YASKAWA servo motor and drive and MITSUBISHI PLC, the feeding line can achieve the very accurate feeding ±0.15mm. Moreover, the whole compact feeding system is only 4.5m length, which will save a lot of workspace for your press workshop.

Features of each parts of 3 IN 1 Feeder Machine for automotive industry

1. Automatic loading coil car
Automatically lift the coil to the mandrel of the decoiler machine with loading coil car. And then the mandrel can expand and clamp the coil.
a) Loading capacity 5T-10T
b) Up-and-down movement the coil car by hydraulic cylinder
c) Horizontal movement by hydraulic motor
d) 2 Coil well-knit, no disperse

2. Decoiler:

a) Coil loading type: Single head with cantilever
b) Max. loading capacity: 5ton-10ton
c) Expansion type: Hydraulic
d) Brake type: pneumatic, stable and safe, also can prolong lifetime of the power system
e) Mandrel hydraulic expansion system. The hydraulic station provide power to drive the hydraulic cylinder to expand & draw back the mandrel to clamp coil or release the coil.
f) Press arm device to hold the strips, preventing coil loose. Further more, the press arm equipped with a PU roller to hold the strips, don`t scratching strip surface.
g) Support arm device. Driven by hydraulic-cylinder, it was use to guide and support strips, Further more, several sets of rollers installed in the device, and all rollers were chrome plated, the surface is very smooth, preventing scratching material surface.
h) Limit arm device, clamping coil in width direction, preventing coil collapsing when coil were too narrow. Further more, the width between two back gauge arms were designed adjustable by operate the manual wheels, coil width range is 70mm-1000mm.
i) Machine equipped with hydraulic station, providing oil pressure to drive the mandrel expansion & contraction and hydraulic cylinder.
j) Sensor device: electric eye loop control system, stable, safe and long lifetime. With the electric eye loop control system, the decoiler release strips automatically.(you can refer to the following image)

3. Straightener-Feeder

a) Structure: Servo motor driven, synchronous belt transmission, gear transmission
b) Servo motor and driver: Yaskawa, Japan
c) Straightening roller: 9 (upper 5/down 4)
d) straightening roller diameter:φ88mm
e) Pinch roller: 2pcs
f) Feeding roller: 2pcs

PICTURES

3 IN 1 Feeder Machine
Model:MFL4
Model	MFL4-400	MFL4-600	MFL4-800	MFL4-1000	MFL4-1300
Stock Width(mm)	70~400	70~600	70~800	70~1000	70~1300
Stock Thickness(mm)	0.6~6.0	0.6~6.0	0.6~6.0	0.6~6.0	0.6~6.0
Max.Coil Weight(kg)	5000	5000	7000	7000	7000
Max.Coil O.D.(mm)	1400	1400	1400	1400	1400
Coil I.D.(mm)	508	508	508	508	508
Feed Length(mm)	~500*	~500*	~500*	~500*	~500*
Max.Line Speed(m/min)	16~24	16~24	16~24	16~24	16~24
Straightener Rolls(piece)	upper 4/down 3
Feed Rolls (set)	1	1	1	1	1
Main Motor	AC5.5	AC7.5	AC7.5	AC11.0	AC11.0
Mandrel Expansion	Hydrauilc	Hydrauilc	Hydrauilc	Hydrauilc	Hydrauilc
Reel Motor(kw)	2.2	2.2	3.7	3.7	3.7
Power(v)	3 Phase 220V/380V/50HZ
Operating Air(Mpa)	0.49	0.49	0.49	0.49	0.49
Straightening Performance
Material Tech-info of thickness & Width	MFL4-400	MFL4-600	MFL4-800	MFL4-1000	MFL4-1300
0.6~1.3	400	600	800	1000	1300
2
2.3
2.5					1170
2.8				933	933
3.2			714	714	714
4		457	457	457	457
4.5	361	361	361	361	361
5	293	293	293	293	293
6	203	203	203	203	203

Remarks:

1)The above figures are the material having yield strength σs=245N/mm² ,Max. tensile strength σb=392 N/mm²)

2)Specifications are subject to change for improvement without notice.

APPLICATION

Automobile stamping, appliances manufacturing, computer and electronic componets, hardware and metal parts etc industry.

Automotive Parts: Bracket, Damper, Barke Pad, Tie Bar, Electric Accessory, Shell Parts Of Printers, Computer Frame,Slide Rail of Car Seat, Splash Shield of car body and etc

MFL4 3 IN 1 Feeder Machine for automotive industry is working in our customer's factory.

3 IN 1 Feeder Machine for automotive industry for making the bracket coil sheet feed line.

This machine is workinng in one of our customer's factory, they produce U type parts with 3 IN 1 Feeder Machine for automotive industry.

With the Yaskawa Servo Systems and Mitsubishi PLC control, the feeding line can reach ±0.15mm feeding accuray.

Contact us if you need more details on 3 in 1 Complete Lines. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Steel Coil Uncoiler Straightener、4 In 1 Leveler Feeders. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Decoiler Straightener Feeder > Compact Feed Lines