KYN61-40.5 medium voltage or high voltage switchgear for power distribution used for electrical control
Product Description
Product Description
KYN61-40.5 Alternating-current Metal-clad Enclosed Withdrawable Switchgear
KYN61-40.5(Z) Metal-clad Enclosed Withdrawable Switchgear (hereinafter referred to as switchgear)
Main technical parameters | ||||
Rated voltage | .................................. | 40.5kV | ||
Rated frequency | .................................. | 50Hz | ||
Rated current of circuit breaker | .................................. | 1250~4000A | ||
Rated current of switchgear | .................................. | 1250~4000A | ||
Rated short-time withstand current (4S) | .................................. | 20 25 31.5kA | ||
Rated peak withstand current (peak) | .................................. | 50 63 80kA | ||
Rated short-circuit breaking current | .................................. | 20 25 31.5kA | ||
Rated short-circuit making current (peak) | .................................. | 5063 80kA | ||
Rated insulation level 1min power frequency withstand voltage | Pole-to-pole, pole-to-ground | 95kV | ||
Between open contacts | 110kV | |||
Lightning impulse withstand voltage (peak) | Pole-to-pole, pole-to-ground | 185kV | ||
Between open contacts | 215kV | |||
IP code | .................................. | IP4X IP2X | ||
Standards
The switchgear and main apparatus contained in it comply with the latest IEC Standards:
• IEC 62271-1 for general purposes
• IEC 62271-200 for the switchgear
• IEC 62271-102 for the earthing Switch
• IEC 62271-100 for the circuit-breakers
• IEC 60071-2 for the insulation coordination
• IEC 62271-106 for the contactors
• IEC 60265-1 for the switch-disconnectors
• IEC 60529 for degree of protections
Service environment:
a) Air temperature:Maximum temperature: +40℃; Minimum temperature:-25℃
b) Humidity:Monthly average humidity 95%; Daily average humidity 90% .
c) Altitude above sea level:Maximum installation altitude: 2500m
d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
e) No frequent violent shake
Fully type-tested
The switchgear has undergone all the tests required by the international (IEC) Standards. Each switchgear unit is subjected to
routine tests in the factory before delivery. These tests are intended to provide a functional check of the switchgear based on
the specific characteristics of each installation.
IEC type tests
• Short-time and peak withstand current
• Temperature rise
• Internal arc capability
• Dielectric test
• Making and breaking capacity of circuit-breaker
• Earthing switch making capacity (top application)
• Mechanical operations of circuit-breaker and line disconnector
• IP degree and impact test
IEC routine factory tests
• Visual inspection and check
• Mechanical sequence operations
• Cabling check
• Electrical sequence operations
• Power frequency withstand voltage
• Measurement of the resistance of the main circuits
• Secondary insulation test
Our Delivery
We can deliver the goods by air or sea. We can provide you with a good shipping company to facilitate your choice Our delivery date is usually 15 to 20 days. If you need special customization, the time may be increased
Standard wooden boxes for outer packing
(1) 1 plastic bag/set
(1) 1 plastic bag/set
If you need specially customized packaging, please inform us in advance.
Related products
company introduction
Certificate
FAQ
Q1:What is your advantages?
A: We are a very famous power distribution product manufacturer in Shanghai, China. We also have our own foreign trade team. We are a company integrating industry and trade
Q2:Can you customize the product according to the size I need?
A: Yes, our factory has a professional team of engineers, we can completely design and develop products for you according to the detailed technical parameters and specifications you require
Q3:Can we use our own logo?
A: Yes, if you have requirements, we can customize the logo you need according to your requirements
A: Yes, if you have requirements, we can customize the logo you need according to your requirements
Q4: What is the quality of your products?
A: Quality is our corporate culture, we regard product quality as life of our company. We have achieved a lot of certifications to meet customs requirements. As a factory, we can control all process of production 100% and every single product will be tested qualified before shipping.
A: Quality is our corporate culture, we regard product quality as life of our company. We have achieved a lot of certifications to meet customs requirements. As a factory, we can control all process of production 100% and every single product will be tested qualified before shipping.
Q5: When can delivery from ordering?
A: The delivery time depend on the quantity you ordered, generally about 15-25 days after deposit of payment.
A: The delivery time depend on the quantity you ordered, generally about 15-25 days after deposit of payment.
Q6:What are your terms of payment
A: 30% in advance 70% before shipment We can pay by TT/ LC/ DP/ Paypal/ union/Alibaba assurance
A: 30% in advance 70% before shipment We can pay by TT/ LC/ DP/ Paypal/ union/Alibaba assurance
Q7: How long is the warranty of your product?
A: Our warranty period is usually three years,. But the warranty period can be extended after discussion and agreement.
Shanghai SETN ELECTRIC Co., Ltd is a professional of power solution and distribution (PTD) engineering and PTD complete equipment supplier. We provide integrated solution and complete PTD high-tech equipment for a variety of PTD engineering. We are one of the leading enterprises in the national industrial technology upgrade plan and one of the leading brands in the field of electric power engineering of China.
Any special requirements can be settled through friendly negotiation.
If you have any other questions, please click the business card below and contact me directly. We will provide you with the best service
Product Categories : high voltage switchgear > KYN61-40.5
Other Products
Hot Products
Jerrcan Blow Molding MachineFolding Bottle Blow Molding Machine20L Double Station Automatic Blow Molding Machine10L Barrels Making Machine30L Accumulator Blow Molding Machine (TVHS-30L)1L Multilayer Four Station Semi Automatic Blow Moulding Machine with CEHigh-Speed Plastic Cap Compression Moulding MachinePlastic Injection MouldPlastic Preform Injection Moulding Machine (ZQ680-M6)Blow Molding of PET BottlePlastic Preform Mold/Injection MouldAutomatic Bottle Blow Moulding Machine (ZQ-M600-3)Water Bottle Blow Moulding Machine (ZQ-B600-4)small plastic extrusion blow molding machineFully automatic pet bottle blow moulding machine for handled bottlePET Bottle Rotary Stretch Blowing Machine - High Quality (ZQ-R12)