MNS SF6 6.6kV LV Solid Insulated Outdoor Switchgear
Product Description
Product Description Product Overview Overview
MNS2.0 low-voltage Switchgear (hereinafter referred to as Switchgear) is applicable for an AC 50~60Hz power distribution system with rated working voltage of 690V; used for all low voltage power distribution systems. It is widely applied in various industries including electric system, petrochemical engineering, industrial and mining enterprises, public utilities, municipal engineering, and commercial buildings.
Thus MNS proves to have the approved solution for the following industries:Oil &Gas,on and off shore,Chemical/Petrochemical,Pharmaceutical,Power Stations,Paper,Water treatment,Mining,Steel,Food, Marine as well as for infrastructure requirements: Data centers, Airports,Office buildings, Shopping centers,Hospitals,Rail
Standards:GB7251.12-2013, IEC61439-1/-2
Working and environmental conditions:
MNS2.0 low-voltage switchgear is designed for indoor installations. The protection classes for MNS2.0 can be up to IP54 under other working conditions.
Environmental temperature:
Maximum short-time temperature: +40℃
Maximum 24h average temperature: +35℃
Minimum temperature : -5℃
Aerating under more rigorous conditions.
Working conditions for measuring, metering instruments and protective relays should conform to the specification of the
manufacturers.
The climatic conditions should be relative humidity of ambient environment: 50% at 40℃.
Switchgear installed indoors should have such conditions as comply with requirements of relevant standards. Measures for prevention of condensation such as ventilation or heating should be used for the switchgear where condensation may occur. Altitude: Not more than 2000m. Equipment should be operated at a reduced capacity when the switchgear is installed at an altitude of more than 2000m.
Main features:
Notable system advantages with regard to design aspects:
⚫Optimum protection for personnel and plant
⚫Design verified by testing (type-tested)
⚫High operational reliability and availability
⚫ Earthquake-, vibration- and shock-proof designs are available
⚫ Maintenance-free busbar and frame construction
⚫Simple retrofitting procedures
⚫Compact, space-saving design
Technical Parameters
Contact us if you need more details on 6.6kv Switchgear. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sf6 Switchgear、Solid Insulated Outdoor Switchgear. If these products fail to match your need, please contact us and we would like to provide relevant information.
MNS2.0 low-voltage Switchgear (hereinafter referred to as Switchgear) is applicable for an AC 50~60Hz power distribution system with rated working voltage of 690V; used for all low voltage power distribution systems. It is widely applied in various industries including electric system, petrochemical engineering, industrial and mining enterprises, public utilities, municipal engineering, and commercial buildings.
Thus MNS proves to have the approved solution for the following industries:Oil &Gas,on and off shore,Chemical/Petrochemical,Pharmaceutical,Power Stations,Paper,Water treatment,Mining,Steel,Food, Marine as well as for infrastructure requirements: Data centers, Airports,Office buildings, Shopping centers,Hospitals,Rail
Standards:GB7251.12-2013, IEC61439-1/-2
Working and environmental conditions:
MNS2.0 low-voltage switchgear is designed for indoor installations. The protection classes for MNS2.0 can be up to IP54 under other working conditions.
Environmental temperature:
Maximum short-time temperature: +40℃
Maximum 24h average temperature: +35℃
Minimum temperature : -5℃
Aerating under more rigorous conditions.
Working conditions for measuring, metering instruments and protective relays should conform to the specification of the
manufacturers.
The climatic conditions should be relative humidity of ambient environment: 50% at 40℃.
Switchgear installed indoors should have such conditions as comply with requirements of relevant standards. Measures for prevention of condensation such as ventilation or heating should be used for the switchgear where condensation may occur. Altitude: Not more than 2000m. Equipment should be operated at a reduced capacity when the switchgear is installed at an altitude of more than 2000m.
Main features:
Notable system advantages with regard to design aspects:
⚫Optimum protection for personnel and plant
⚫Design verified by testing (type-tested)
⚫High operational reliability and availability
⚫ Earthquake-, vibration- and shock-proof designs are available
⚫ Maintenance-free busbar and frame construction
⚫Simple retrofitting procedures
⚫Compact, space-saving design
Technical Parameters
Electrical Parameters | Rated voltage (V) | AC400,690 | Technical Data | ||
Rated insulation voltage (V) | AC690,1000 | KYN28A-12(G) | |||
Rated impact withstand voltage (V) | 12000 | 12 | |||
Overvoltage level | Ⅳ | 42、54* | |||
Class of pollution | 3 | 48、61* | |||
Rated frequency (Hz) | 50、60 | 75、96* | |||
Main busbar | Rated current (A) | 6300 | 85、109* | ||
Rated peak withstand current (kA) | 220 | 50 | |||
Rated short-time withstand current (kA) | 100 | 630、1250、1600、2000、2500、3150 | |||
Distribution busbar | Rated current (A) | 1200 | 31.5、40 | ||
Rated peak withstand current (kA) | 110 | 80、100 | |||
Rated short-time withstand current (kA) | 50 | 4 | |||
Structure | Overall dimensions | Height (mm) | 2200 | Shell : IP4X,breaker compartment door (in open condition): IP2X | |
Width (mm) | 400, 600, 800, 1000, 1200 | LSC2B | |||
Depth (mm) | 800, 1000, 1200 | ||||
Modular interval E (mm) | 25 | ||||
Degrees of protection | IP30~ IP54 |
Product Categories : Switchgear > LV Switchgear
Premium Related Products
Other Products
Hot Products
Jerrcan Blow Molding MachineFolding Bottle Blow Molding Machine20L Double Station Automatic Blow Molding Machine10L Barrels Making Machine30L Accumulator Blow Molding Machine (TVHS-30L)1L Multilayer Four Station Semi Automatic Blow Moulding Machine with CEHigh-Speed Plastic Cap Compression Moulding MachinePlastic Injection MouldPlastic Preform Injection Moulding Machine (ZQ680-M6)Blow Molding of PET BottlePlastic Preform Mold/Injection MouldAutomatic Bottle Blow Moulding Machine (ZQ-M600-3)Water Bottle Blow Moulding Machine (ZQ-B600-4)small plastic extrusion blow molding machineFully automatic pet bottle blow moulding machine for handled bottlePET Bottle Rotary Stretch Blowing Machine - High Quality (ZQ-R12)